Browse Source

Clean up excess whitespace

tags/1.1.5
Scott Lahteine 3 years ago
parent
commit
f713f25fa5
9 changed files with 24 additions and 24 deletions
  1. +4
    -4
      Marlin/Marlin_main.cpp
  2. +1
    -1
      Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h
  3. +1
    -1
      Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h
  4. +1
    -1
      Marlin/example_configurations/delta/generic/Configuration.h
  5. +1
    -1
      Marlin/example_configurations/delta/kossel_mini/Configuration.h
  6. +1
    -1
      Marlin/example_configurations/delta/kossel_pro/Configuration.h
  7. +1
    -1
      Marlin/example_configurations/delta/kossel_xl/Configuration.h
  8. +12
    -12
      Marlin/pins_PRINTRBOARD_REVF.h
  9. +2
    -2
      buildroot/share/git/mfup

+ 4
- 4
Marlin/Marlin_main.cpp View File

@@ -5280,7 +5280,7 @@ void home_all_axes() { gcode_G28(true); }
#if DISABLED(PROBE_MANUALLY)
home_offset[Z_AXIS] -= probe_pt(dx, dy, stow_after_each, 1, false); // 1st probe to set height
#endif
do {

float z_at_pt[13] = { 0.0 };
@@ -5380,7 +5380,7 @@ void home_all_axes() { gcode_G28(true); }
#if ENABLED(PROBE_MANUALLY)
test_precision = 0.00; // forced end
#endif
switch (probe_points) {
case 1:
test_precision = 0.00; // forced end
@@ -6259,7 +6259,7 @@ inline void gcode_M17() {
inline void gcode_M23() {
// Simplify3D includes the size, so zero out all spaces (#7227)
for (char *fn = parser.string_arg; *fn; ++fn) if (*fn == ' ') *fn = '\0';
card.openFile(parser.string_arg, true);
card.openFile(parser.string_arg, true);
}

/**
@@ -12877,7 +12877,7 @@ void kill(const char* lcd_msg) {
#if defined(ACTION_ON_KILL)
SERIAL_ECHOLNPGM("//action:" ACTION_ON_KILL);
#endif
#if HAS_POWER_SWITCH
SET_INPUT(PS_ON_PIN);
#endif


+ 1
- 1
Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration.h View File

@@ -497,7 +497,7 @@

// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 101.0 //mm Get this value from auto calibrate
// Trim adjustments for individual towers
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer


+ 1
- 1
Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h View File

@@ -497,7 +497,7 @@

// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 101.0 //mm Get this value from auto calibrate
// Trim adjustments for individual towers
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer


+ 1
- 1
Marlin/example_configurations/delta/generic/Configuration.h View File

@@ -487,7 +487,7 @@

// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 124.0 //mm Get this value from auto calibrate
// Trim adjustments for individual towers
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer


+ 1
- 1
Marlin/example_configurations/delta/kossel_mini/Configuration.h View File

@@ -487,7 +487,7 @@

// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 105.2 //mm Get this value from auto calibrate
// Trim adjustments for individual towers
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer


+ 1
- 1
Marlin/example_configurations/delta/kossel_pro/Configuration.h View File

@@ -473,7 +473,7 @@

// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 152.357 //mm Get this value from auto calibrate
// Trim adjustments for individual towers
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer


+ 1
- 1
Marlin/example_configurations/delta/kossel_xl/Configuration.h View File

@@ -491,7 +491,7 @@

// Horizontal distance bridged by diagonal push rods when effector is centered.
#define DELTA_RADIUS 174.1 //mm Get this value from auto calibrate
// Trim adjustments for individual towers
// tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0
// measured in degrees anticlockwise looking from above the printer


+ 12
- 12
Marlin/pins_PRINTRBOARD_REVF.h View File

@@ -32,9 +32,9 @@
*
* Teensyduino - http://www.pjrc.com/teensy/teensyduino.html
* Installation instructions are at the above URL.
*
*
* Select Teensy++ 2.0 in Arduino IDE from the 'Tools -> Boards' menu
*
*
* Note: With Teensyduino extension, the Arduino IDE will report 130048 bytes of program storage space available,
* but there is actually only 122880 bytes due to the larger DFU bootloader shipped by default on all Printrboard RevF.
*
@@ -99,8 +99,8 @@
#define DAC_STEPPER_CURRENT

// Set default drive strength percents if not already defined - X, Y, Z, E axis
#ifndef DAC_MOTOR_CURRENT_DEFAULT
#define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 }
#ifndef DAC_MOTOR_CURRENT_DEFAULT
#define DAC_MOTOR_CURRENT_DEFAULT { 70, 70, 50, 70 }
#endif

// Number of channels available for DAC
@@ -170,17 +170,17 @@

#if ENABLED(MINIPANEL)
#if ENABLED(USE_INTERNAL_SD)
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN#
#define SDSS 20 // 10 B0
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN#
#define SDSS 20 // 10 B0
#define SD_DETECT_PIN -1 // no auto-detect SD insertion on built-in Printrboard SD reader
#else
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN#
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN#
#define SDSS 11 // 36 C1 EXP2-13 EXP2-07
#define SD_DETECT_PIN 9 // 34 E1 EXP2-11 EXP2-04
#endif
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN#
#define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04
// PIN FASTIO PIN# ATUSB90 PIN# Teensy2.0++ PIN# Printrboard RevF Conn. MKSLCD12864 PIN#
#define DOGLCD_A0 4 // 29 D4 EXP2-05 EXP1-04
#define DOGLCD_CS 5 // 30 D5 EXP2-06 EXP1-05
#define BTN_ENC 6 // 31 D6 EXP2-07 EXP1-09
#define BEEPER_PIN 7 // 32 D7 EXP2-08 EXP1-10
@@ -190,8 +190,8 @@
//#define LCD_BACKLIGHT_PIN 43 // 56 F5 EXP1-12 Not Implemented
//#define SCK 21 // 11 B1 ICSP-04 EXP2-09
//#define MOSI 22 // 12 B2 ICSP-03 EXP2-05
//#define MISO 23 // 13 B3 ICSP-06 EXP2-05
//#define MISO 23 // 13 B3 ICSP-06 EXP2-05
// encoder connections present
#define BLEN_A 0
#define BLEN_B 1


+ 2
- 2
buildroot/share/git/mfup View File

@@ -2,10 +2,10 @@
#
# mfup
#
# - Fetch latest upstream and replace the PR Target branch with
# - Fetch latest upstream and replace the PR Target branch with
# - Rebase the (current or specified) branch on the PR Target
# - Force-push the branch to 'origin'
# -
# -
#

[[ $# < 2 ]] || { echo "Usage: `basename $0` [branch]" 1>&2 ; exit 1; }


Loading…
Cancel
Save