Você não pode selecionar mais de 25 tópicos Os tópicos devem começar com uma letra ou um número, podem incluir traços ('-') e podem ter até 35 caracteres.
Bernd Zeimetz 7d2f2d9087
Update README.md
2 anos atrás
images add renderings 2 anos atrás
README.md Update README.md 2 anos atrás
bearing-puller.scad Update copyright/license 2 anos atrás
bearing-puller_6000.stl Initial commit 2 anos atrás
bearing-puller_for_cube_stereo_120.stl Initial commit 2 anos atrás


3d printed bearing removal tool

Simple tool to pull ball bearings out of their socket. bearing puller

Short howto

The provided STL files support type 6000 bearings. If you need something else, use OpenSCAD and modify the variables on top of the file. Also you'll need a bolt, washers and a screw for the bolt. You might want to make sure that the washer on the closed side of the tool is at least as large as the tool.

3d printing

I've used PETG, 0.2mm layer height, 50% Tri-Hexagon infill, 3mm walls (basically you want the walls that take the load to be solid, the washer you put on top will spread the preasure on them), no fan. Might need a brim if printed in PETG.

CUBE Stereo 120 HPA my 2015 mode

The main reason for me to create this project was to be able to remove the pivot bearings of my CUBE Stereo 120 HPA, model year 2015. Unfortunately the frame was built in a way that normal/commercial tools can't be used as the frame is not completely flat around the bearing. So the OpenSCAD file has an option to enable the “cube bike” mode which basically removes a bit material on 1/4 of the tool. YOu can enable/disable the feature as needed and modify the height of the removed material.

cube stereo mode

tool in use

tool in use

Copyright © 2018 Bernd Zeimetz bernd@bzed.de

License: Creative Commons Attribution-ShareAlike 4.0 International