Browse Source

Update README.md

master
Bernd Zeimetz 1 year ago
parent
commit
7d2f2d9087
No account linked to committer's email address
1 changed files with 2 additions and 2 deletions
  1. 2
    2
      README.md

+ 2
- 2
README.md View File

@@ -10,8 +10,8 @@ Also you'll need a bolt, washers and a screw for the bolt. You might want to mak
## 3d printing
I've used PETG, 0.2mm layer height, 50% Tri-Hexagon infill, 3mm walls (basically you want the walls that take the load to be solid, the washer you put on top will spread the preasure on them), no fan. Might need a brim if printed in PETG.

## cube stereo 120 hpw my 2015 mode
The main reason for me to create this project was to be able to remove the pivot bearings of my Cube Stereo 120 HPA, model year 2015. Unfortunately the frame was built in a way that normal/commercial tools can't be used as the frame is not completely flat around the bearing.
## CUBE Stereo 120 HPA my 2015 mode
The main reason for me to create this project was to be able to remove the pivot bearings of my CUBE Stereo 120 HPA, model year 2015. Unfortunately the frame was built in a way that normal/commercial tools can't be used as the frame is not completely flat around the bearing.
So the OpenSCAD file has an option to enable the "cube bike" mode which basically removes a bit material on 1/4 of the tool. YOu can enable/disable the feature as needed and modify the height of the removed material.

![cube stereo mode](https://raw.githubusercontent.com/bzed/3d-bearing-removal-tool/master/images/bearing-puller_workaround.png)

Loading…
Cancel
Save